I am an engineer, photographer, musician, and much more. Explore my technical projects and creative arts below.
The Workbench
View All →A collection of academic research, personal builds, and technical experiments.
Adaptive Flight Control of Fixed-Wing UAVs (PCAC)
Research & Flight TestsFlight-test demonstration of Predictive Cost Adaptive Control (PCAC) implemented on an autonomous fixed-wing aircraft without prior aerodynamic modeling. Combines recursive least squares (RLS) with variable-rate forgetting (VRF) for online identification and receding-horizon MPC solved via dual-gradient projection. Deployed in ROS2 on an NVIDIA Jetson companion computer interfaced with ArduPilot for real-time trajectory tracking.
Velocity-Independent Wheel Slip Control
Vehicle Dynamics & ControlFormulated a velocity-independent traction control strategy using model-based wheel angular acceleration thresholds derived from a 5-DoF longitudinal half-car model coupled with a nonlinear Pacejka tire curve. Developed a three-stage discrete filtering pipeline (Kinematic Kalman Filter, Causal Savitzky-Golay polynomial, and Statistical Shrinkage) to eliminate sensor differentiation noise with minimal phase lag. Implemented an asymmetric, slew-rate-limited PI torque controller that suppresses deep four-wheel slip and driveline chatter across RWD and AWD configurations.
Camera GNSS Geotagger & Telemetry Module
Embedded SystemsDesigned a low-power external GNSS geotagger and OLED display module that wakes automatically on camera power-on via an RTC hardware interrupt and enters deep sleep 10 seconds after power-down. Uses an ESP32 to read a SparkFun u-blox NEO-M8U receiver over I2C (UBX protocol at 3 Hz), synthesize checksummed GPGGA/GPRMC NMEA sentences at 4800 baud for direct Nikon camera geotagging, and filter battery voltage via a 10-tap FIR filter. Implemented high-side peripheral power gating using an FQP27P06 P-channel MOSFET and a 22kΩ pull-up resistor to isolate peripheral quiescent draw during deep sleep.
Creative Arts
Explore →Exploring my creative expressions.
About Me
I am a mechanical engineer currently pursuing my Master’s degree in Mechanical Engineering at the University of Michigan in Ann Arbor, specializing in dynamics and control. Having earned my Bachelor’s in Mechanical Engineering from Embry-Riddle Aeronautical University in Daytona Beach, Florida, my academic journey is centered around developing robust autonomous and aerospace systems.
At Michigan, I work as a Graduate Research Assistant in the Department of Aerospace Engineering. My research concentrates on integrating indirect adaptive control with model predictive control (MPC). Beyond the theory and algorithm design, I work directly with flight hardware and assist in real-world testing of fixed-wing flight controllers.
Beyond academia, I explore the world through both the lens and the canvas. I spend much of my free time hiking and traveling across the United States to photograph diverse landscapes and quiet moments. When I’m not outdoors, I channel that visual perspective into 3D digital art, modeling environments and experimenting with digital world-building.